Welcome toDongguan Keyang Automation Equipment Co., Ltd.Official website!

Electric sliding table
your current location : Home >> News >> Industry News

Addr:Dongguan Mayor Anzhen Wusha Ring East Road Chen House brand building.

Tel:0769-89368511 / 33388293

Mobile:13925552470(Wechat Code)

Fax:0769-89032105

Q  Q:2850923180

Email:wdp@keyangauto.com

website:en.keyangauto.com


Relevant precautions for inspection and maintenance of linear modules

2021-10-23

As a mechanical transmission component, the linear module is very fast during operation. The following are the relevant precautions during installation, operation, inspection and maintenance:

线性模组

1. Attention when automatic

1. Please set up a safety fence at the movable range of the linear module.

2. At the entrance of the safety fence, please design an emergency switch device.

3. Please try not to enter or exit from the entrance other than the relevant emergency switch device.


Second, be careful

1. When operating the linear module, please be careful not to let your hands or other objects enter the movement range of the module.


3. Operation Instructions

1. Before installing the linear module, you must read the operating instructions and operate according to the instructions in the installation instructions.

2. If the installation, adjustment, inspection, maintenance, operation, etc. are not written in the operation manual, please do not operate.


Fourth, it is forbidden to use in flammable gas and other environments

1. Linear modules do not have explosion-proof specifications.

2. Do not use in flammable gas, flammable powder, flammable liquid and other surrounding environments.


5. It is forbidden to use it in the case of possible electromagnetic harm.

1. Please do not use it in places with electromagnetic damage, electrostatic discharge, infinite magnetic waves, etc.


6. Precautions when installing the linear module brake vertically

1. Before releasing the brake, block the upper and lower shafts with a block or other objects.


Seven, the safety matters of the protective block (collision block)

1. The protective block is designed and installed to prevent the loss or movement of power (electricity, air pressure, etc.) from causing danger.

2. The protective block will have the danger of the falling object. For the survey of the size, weight, temperature, and chemical properties of the object, appropriate safety monitoring and protection tests should be taken.


Eight, matters needing attention when checking the controller

1. Check the controller. When touching the external terminals or connecting posts of the controller, please cut off the power supply of the controller in order to prevent static electricity.

2. Do not touch the inside of the controller.


Nine, deal with the loss and abnormality of the linear module

1. In case of abnormal situation or loss, please stop using it immediately and contact our technical staff.


10. Precautions when the motor and reducer generate high temperature

1. High temperature may be generated when the motor and reducer are running. When checking the linear module, it is necessary to confirm that the motor and reducer stop rotating and contact when the temperature drops.


11. Prohibition of removal, alteration and damage warning signs

1. It is forbidden to remove the warning sign without permission.

2. Do not block the warning sign with nearby machinery or objects.

3. Ensure that the pattern and text of the warning sign can be seen from outside the safety fence.


Twelve, electrostatic protection

Extreme will linear modules and controllers have grounding devices.


(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)


Label

Last viewed: