1. Attention when the linear module runs automatically

1. Please set up a safety fence at the movable range of the linear slide.

2. At the entrance of the safety fence, please design an emergency switch device.

3. Please try not to enter or exit from the entrance other than the relevant emergency switch device.

Second, pay attention to the grip

1. When operating the linear slide, please be careful not to let your hands or other objects enter the movement range of the module.

3. Operation Instructions

1. Before installing the linear module, you must read the operation instructions and operate according to the instructions in the installation instructions.

2. If the installation, adjustment, inspection, linear module maintenance, operation, etc. are not written in the operation manual, please consult the after-sales service for how to operate.

4. It is forbidden to use in flammable gas and other environments

1. Linear slides do not have explosion-proof specifications.

2. Do not use in flammable gas, flammable powder, flammable liquid and other environments.

5. It is forbidden to use in the case of possible electromagnetic damage

1. Please do not use it in places with electromagnetic damage, electrostatic discharge, and infinite magnetic waves.

6. Precautions when installing the linear slide brake vertically

1. Before releasing the brake, block the upper and lower shafts with a block or other objects.

7. Safety matters of protective block (collision block)

1. The protection block is designed and installed to prevent the disappearance or change of power (electricity, air pressure, etc.) from causing danger.

2. The protective block will be in danger when the object falls. For the investigation of the size, weight, temperature and chemical properties of the object, appropriate safety monitoring tests should be taken.

Eight, the controller inspection matters needing attention

1. When checking the controller, contacting the external terminals or connecting posts of the controller, the characteristics of the linear module should be cut off to prevent static electricity.

2. Do not touch the inside of the controller.

9. Handling the loss and abnormality of the linear slide table

1. In case of abnormal situation or loss, please stop using it immediately and contact the after-sales technician.

10. Precautions when the motor and reducer generate high temperature

1. High temperature may be generated when the motor and reducer are running. When checking the linear slide table, it is necessary to confirm that the motor and reducer stop rotating and contact again when the temperature drops.

11. Prohibit removal, alteration and damage warning signs

1. It is forbidden to remove the warning sign without permission.

2. Do not block warning signs with nearby machinery or objects.

3. Ensure that the pattern and text of the warning sign can be seen from outside the safety fence.

12. Electrostatic protection

Be sure to ground the linear slide and controller.

(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)