Linear modules have their own load weight, horizontal load and vertical load. Different types of linear modules have different load sizes. So what are the factors that affect the load of linear modules?

1. When we choose, we should consider whether it is a horizontal or vertical load. Under the same thrust, the vertical load receives a downward pull due to gravity, and the weight it can carry is different. When the load is exceeded, if the brakes are not braked in time, the machine may be damaged, and even personal safety may be caused.

2. We need to know the static load value and dynamic load value of the linear module. Therefore, we need to understand the linear module structure and various models inside the linear module. We can find the manufacturer for selection information, selection information book. There are usually marked in it, usually we look at the limit load value of the movement

3. The screw module or the synchronous belt module linear module is divided into screw module and synchronous belt module due to different transmission parts. Generally, the width of the profile is different, and the force value it can bear is different. The rod module is relatively rigid and can be used for heavy-duty work, while the timing belt is a light-duty module

4. The bearing capacity of the aluminum profile itself There are many kinds of strokes of the synchronous belt linear module. The size of the linear module is such as 40mm 45mm 50mm 60mm 80mm 100mm, etc. The larger the width of the profile, the stronger the bearing capacity. If the load is too heavy, it will be to deform it, causing unnecessary losses

5. The acceleration of linear module movement. Under the conditions of the same specifications, the greater the acceleration, the less weight it can carry.

The factors that generally affect the load of the linear module are these points. Of course, the specific important thing depends on the purpose of use. The specific scene should also be analyzed in detail. In short, the bearing capacity of the linear module is not only a single factor, it is the overall hardware structure. The result of the combined factors, even if the lead is the same, the thrust is the same, but if the linear module is installed in a different way, its load value will be different, which needs to be obtained through professional mechanical calculation methods. , professional, in order to make the product better and play its value.

(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)