Getting started with precision steel ball screw grease:

There are many parameters to discuss in the placement and selection of steel ball screws. Operating load, speed, accuracy, condition and power requirements are all critical prerequisites in the layout specification. Whether scheduling an engineer to choose between rolled steel ball screws or fine ground steel ball screws, the composition of the smoothing agent needs to be discussed. Using a suitable smoothing agent can reduce the torque, reduce the torque, exceed the power of the screw, and prolong the service life. Therefore, steel ball screws can maintain the advantage of low arguments. It is achieved by using a smoothing agent to reduce the throwing obstacle between the steel ball and the raceway surface and to approximate the sliding force between the steel balls.

Preparation before smooth ball screw:

Before troweling and filling smooth, the ball screw assembly must be thoroughly cleaned to remove all infectious material. Infectious substances are a significant cause of premature failure of steel ball screws. Precise smoothness prevents large general infectious substances from being incorporated into the nut, greatly reducing possible interference from external infectious substances. Anti-rust oils are often used in the conveying and accumulation process of steel ball screw components. The anti-rust oil should be thoroughly wiped off before using the smoothing agent used.

Curved module ball screw smooth control:

You may want to use a variety of methods to add smoothing agent to the ball screw and leave the smoothing agent in the screw nut. For example, when grease is used for smoothing, grease is added to the lead screw nut through an oil fill hole in the lead screw nut or lead screw flange. There are scrapers or washers on both ends of the nut to prevent smooth seborrhea and the addition of foreign infectious agents. Nuts; when using oil lubrication, a lubrication unit with a pump and filter system is required, and the method of oil injection is discussed.