Welcome toDongguan Keyang Automation Equipment Co., Ltd.Official website!

Electric sliding table
your current location : Home >> News >> Company News

Addr:Dongguan Mayor Anzhen Wusha Ring East Road Chen House brand building.

Tel:0769-89368511 / 33388293

Mobile:13925552470(Wechat Code)

Fax:0769-89032105

Q  Q:2850923180

Email:wdp@keyangauto.com

website:en.keyangauto.com


Correct maintenance method of linear slide module

2019-05-22

The linear slide module needs maintenance. Let me tell you about the importance of linear module maintenance.


Linear module is an organic complex that integrates fine position detection technology, driving technology, linear module orientation technology, control technology and many other skills. In these linear module production technologies, if a certain aspect is improved or improved, the overall function of the linear module will be improved. The characteristics of the linear module are that when the workpiece table is driven by direct drive instead of direct drive, the accuracy, speed and acceleration of the workpiece table will be improved because the length of the transmission chain and the error transmission in the transmission link are reduced. New materials and new technologies should be used in real time to meet the needs of workpiece table development.


Linear module


When using the linear module conventionally, different greases need to be selected according to the conditions of use when refueling regularly. Normal maintenance can prolong the service life of the guide rail.


(1) Guide oil (slide oil)


(2) Dual-use oil for hydraulic guide rails


(3) Grease.


The linear slide module sometimes comes into contact with water, such as lathes and machining centers. Water often splashes on the guide rails. If the water separation performance of the guide rail oil is not good, it will be decomposed by water, and the oil will drop into the cutting fluid, causing The cutting fluid is polluted, so the water separation performance of the guide rail is extremely important. Some rougher machines have large guide rails, simple structure, and pits on the guide rails. They are designed to be lubricated with grease, and most of them are manually squeezed with a grease gun to give oil. All greases are required to be EP extreme pressure type, otherwise, after being squeezed out, the grease remaining on the module cannot bear heavy loads.


(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)


Linear module


Label

Last viewed: