Welcome toDongguan Keyang Automation Equipment Co., Ltd.Official website!

Electric sliding table
your current location : Home >> News >> Company News

Addr:Dongguan Mayor Anzhen Wusha Ring East Road Chen House brand building.

Tel:0769-89368511 / 33388293

Mobile:13925552470(Wechat Code)

Fax:0769-89032105

Q  Q:2850923180

Email:wdp@keyangauto.com

website:en.keyangauto.com


How to properly maintain the electric slide?

2021-10-12

The electric sliding table needs maintenance. The electric sliding table manufacturer will tell you the importance of the maintenance of the electric sliding table.


Maintenance of electric slides


The electric sliding table is an organic complex that integrates multiple technologies such as precise position detection technology, driving technology, linear module orientation technology, and control technology. Among these technologies, if a certain aspect is improved or improved, the overall function of the linear module will be improved.


For example, when the workpiece table is driven by direct drive instead of direct drive, the accuracy, speed and acceleration of the workpiece table will be improved because the length of the transmission chain and the error transmission in the transmission link are reduced. Therefore, new materials and new technologies should be used in real time to meet the needs of workpiece table development.


When using the electric slide table regularly, it is necessary to select different greases according to the conditions of use when refueling regularly.


Normal maintenance can prolong the life of the guide rail.

(1) Guide oil (slide oil)

(2) Dual-use oil for hydraulic guide rails

(3) Grease.


The electric slide module sometimes comes into contact with water, such as lathes and machining centers, and water is often splashed on the guide rail. If the water separation performance of the guide rail oil is not good, it will be decomposed by water, and the oil will drop into the cutting fluid, causing The cutting fluid is polluted, so the water separation performance of the guide rail is important. Some rougher machines have large guide rails, simple structure, and pits on the guide rails. They are designed to be lubricated with grease, and most of them are manually squeezed with a grease gun to give oil. All greases are required to be of EP extreme pressure type, otherwise the grease remaining on the module cannot withstand heavy loads after being squeezed out.


(Part of the material on this website comes from the Internet. If the information displayed on this website violates the intellectual property rights or other legitimate rights and interests of media or individuals, please notify us in time, and we will delete it immediately.)



Label

Next Chapter: None

Last viewed:

Related products

Relevant news